추천 제품
vapor pressure
<0.01 mmHg ( 20 °C)
Quality Level
양식
solid
bp
260 °C (lit.)
mp
96-99 °C (lit.)
solubility
THF: soluble
acetone: soluble
ethyl acetate: soluble
toluene: soluble
작용기
isocyanate
SMILES string
O=C=Nc1ccc(cc1)N=C=O
InChI
1S/C8H4N2O2/c11-5-9-7-1-2-8(4-3-7)10-6-12/h1-4H
InChI key
ALQLPWJFHRMHIU-UHFFFAOYSA-N
애플리케이션
1,4-Phenylene diisocyanate (PPDI) can be used as:
It can also be used:
- A reactant to synthesize high yield polymers via criss-cross addition polymerization reaction with alkyl aldazines in pyridine.
- An organic building block to prepare adamantyl-containing diurea and thiourea derivatives applicable as potent mammalian and human soluble epoxide hydrolase inhibitors.
- A coupling agent to synthesize polyethylene glycol (PEG)/silica composite material using dibutyltin dilaurate (DBTDL) as a catalyst.
It can also be used:
- As a cross-linking reagent to investigate the mechanism of enzyme immobilization on silanized surfaces.
- In the synthesis of the dipodal bis-urea receptor, a selective receptor for hydrogen sulfate.
- In the deposition of polyurea resists films via molecular layer deposition.
신호어
Danger
유해 및 위험 성명서
Hazard Classifications
Acute Tox. 2 Inhalation - Aquatic Chronic 2 - Eye Irrit. 2 - Resp. Sens. 1 - Skin Irrit. 2 - Skin Sens. 1
Storage Class Code
6.1A - Combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
WGK
WGK 3
Flash Point (°F)
>235.4 °F - closed cup
Flash Point (°C)
> 113 °C - closed cup
개인 보호 장비
dust mask type N95 (US), Eyeshields, Faceshields, Gloves
이미 열람한 고객
Han Zhou et al.
ACS applied materials & interfaces, 3(2), 505-511 (2011-02-10)
Photoresist materials comprise one of the main challenges faced by lithography to meet the requirements of electronic device size scaling. Here we report for the first time the use of molecular layer deposition (MLD) to produce photoresist materials with controllable
Synthesis of adamantyl-containing 1, 3-disubstituted diureas and thioureas, efficient targeted inhibitors of human soluble epoxide hydrolase
Butov GM, et al.
Russian Chemical Bulletin, 64(7), 1569-1575 (2015)
S K Dogan et al.
Journal of the mechanical behavior of biomedical materials, 71, 349-361 (2017-04-14)
Poly(lactic acid) (PLA)/thermoplastic polyurethane (TPU) blends were melt-mixed and compatibilized to investigate their biocompatibility, biodegradability and thermally induced shape memory properties. The blend compositions were PLA/TPU: 80/20 (20TPU) and PLA/TPU: 50/50 (50TPU). 1,4-phenylene diisocyanate (PDI) was used in order to
Yipeng Sun et al.
Advanced materials (Deerfield Beach, Fla.), 31(4), e1806541-e1806541 (2018-12-06)
Metallic Li is considered as one of the most promising anode materials for next-generation batteries due to its high theoretical capacity and low electrochemical potential. However, its commercialization has been impeded by the severe safety issues associated with Li-dendrite growth.
Mahbobeh Ghazagh Miri et al.
Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy, 205, 200-206 (2018-07-18)
A 3D urea-based porous organic polymer (Urea-POP) was prepared via the reaction of tetrakis(4-aminophenyl)methane and 1,4-Phenylene diisocyanate. The polymer was subsequently reacted with 2D layered nanosheets of graphene oxide (GO) to prepare Urea-POP/GO as a novel and highly efficient sorbent
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.